BDWXR - STAY BRITE

  • MSDS: BDWXR
  • Manufacturer: J W HARRIS CO INC
  • Product Name: STAY BRITE
  • National Stock Number: 3439-00-347-5298
Product Identification

Product ID:STAY BRITE
MSDS Date:02/01/1992
FSC:3439
NIIN:00-347-5298
MSDS Number: BDWXR

Responsible Party
J.W.HARRIS CO.INC.
10930 DEERFIELD ROAD
CINCINNATI, OH 45242
US

Emergency Phone: 513-891-2000/800-424-9300(CHEMTREC)

Info Phone: 513-891-2000

Cage: 27911

Contractor
J. W. HARRIS CO., INC.
CINCINNATI, OH 45242-4110 US

Telephone: 513-891-2000

Cage: 27911

Ingredients

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 4%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 96%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- INHALATION OF TIN FUME MAY
CAUSE METAL FUME FEVER. OVEREXPOSRE MAY CAUSE HEADACHE, NAUSEA,
DIZZINESS, BODY ACHES AND ANEMIA. FUMES MAY IRRITATE EYES AND SKIN.
CHRONIC- MAY CAUSE COUGH, CHEST PA IN, FEVER, SHORTNESS OF BREATH.
TARGET ORGAN:LUNGS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE, SKIN AND RESPIRATORY TRACT IRRITATION,
NAUSEA, VOMITING, FEVER, BODY ACHES, CHILLS, DIZZINESS, HEADACHE
Medical Cond Aggravated by Exposure:PERSONS WITH IMPAIRED RESPIRATORY
FUNCTION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.

First Aid

First Aid:CALL A DOCTOR IF SYMPTOMS PERSIST. EYE:IMMEDIATELY FLUSH WITH
WATER FOR 15 MINUTES, HOLDING EYELIDS OPEN. SKIN:WASH WITH SOAP &
WATER. INHALED:REMOVE TO FRESH AIR. PROVIDE CPR/OXYGEN IF NEEDED.
ORAL:N OT LIKELY.

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE. DO NOT USE WATER
ON FIRE WHERE MOLTEN METALS IS PRESENT.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:OPEN FLAME OR SPARKS CAN IGNITE
COMBUSTIBLES.

Accidental Release

Spill Release Procedures:COLLECT AND USE.
Neutralizing Agent:NOT RELEVANT

Handling

Handling and Storage Precautions:KEEP AWAY FROM INCOMPATIBLE MATERIALS.
FOOD AND DRINK SHOULD NOT BE CONSUMED IN AREAS WHERE METAL
EXPOSURES ARE POSSIBLE.
Other Precautions:READ WARNING LABELS. KEEP OUT OF REACH OF CHILDREN.
FOR INDUSTRIAL USE ONLY. DO NOT BREATHE FUMES. WASH THOROUGHLY
AFTER HANDLING.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED SUPPLIED AIR RESPIRATORY
PROTECTION OR RESPIRABLE FUME RESPIRATOR WHEN WELDING, BRAZING OR
SOLDERING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR VENTILATION
DOES NOT KEEP EXPOSURE B ELOW TLV.
Ventilation:USE GENERAL & LOCAL EXHAUST AT FLAME TO KEEP FUMES AND
GASES BELOW TLV'S IN THE WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:FACE SHIELD/GOGGLES DURING SOLDERING
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. WASH THOROUGHLY BEFORE EATING AND DRINKING.
Supplemental Safety and Health
NSN CANCELLED. EFFECTIVE DATE: 92336. REPLACEMENT NSN:
3439-00-602-1542.

Chemical Properties

HCC:N1
NRC/State Lic Num:NOT RELEVANT
Spec Gravity:NOT RELEVANT
Evaporation Rate & Reference:NOT RELEVANT
Solubility in Water:INSOLUBLE
Appearance and Odor:WIRE, GRAY TO SILVER IN COLOR. SOLDER MAY BE
SOLID/CONTAIN AN INNER CORE OF FLU

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SOLDERING FUMES CANNOT BE CLASSIFIED
SIMPLY, DEPENDING ON METAL BEING SOLDERED, PROCESS, PROCEDURES &
FILLER METALS USED

Disposal

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.